Wireless Monitoring Technology

Go Wireless and Get Real Time Visibility With Remote Rire System Monitoring

Keep your fire protection assets connected, compliant and performing reliably with Delta Fire's wireless monitoring systems. Designed for critical environments where uptime and reliability matter most, these wireless solutions deliver continuous monitoring of a systems performance and status without the need for extensive cabling or intrusive installations. Ideal for industrial sites, mining operations, data centres, warehouses and large commercial facilities, wireless systems are an efficient, cost effective way to oversee equipment health, event alerts and maintenance requirements.
Why Delta Fire

Remote monitoring streamlines maintenance and inspection regimes

Our remote fire monitoring systems for warehouses, data centres and other facilities enable site managers and facility operators to see and supervise fire suppression and safety equipment. This ensures crucial assets remain in good condition and are ready to respond when fire threats arise. Wireless solutions also assist with timely maintenance and reduce the need for manual inspections.
With more than 25 years of experience in special hazards fire protection, Delta Fire is trusted by organisations across Australia to provide these advanced fire-system technologies that enhance safety, compliance and efficiency.

Wireless monitoring technology supersedes older technology that relies on physically connecting alarms and controls by running wires between them, or checking on an assets status by visually inspecting a gauge or meter. The Delta Fire solutions bring contemporary safety technology to the fore.
Request a Consultation
Real time data on system health, cylinder pressure and event status via continuous system monitoring
Remote visibility of sites through secure wireless communications
No complex wiring or extensive building works required
Streamline servicing requirements and minimise manual checks.
Enhanced record keeping and regulatory compliance

Industry Expertise & Experience

Backed by 25 years of expertise in special hazards fire protection monitoring systems, Delta Fire delivers reliable and fail safe solutions across a wide range of environments. From flame detectors to gas and smoke alarms, our team designs and deploys remote monitoring systems for fire protection that help reduce human error and safeguard critical assets with precision.

Industry Expertise & Experience

Backed by 25 years of expertise in special hazards fire protection monitoring systems, Delta Fire delivers reliable and fail safe solutions across a wide range of environments. From flame detectors to gas and smoke alarms, our team designs and deploys remote monitoring systems for fire protection that help reduce human error and safeguard critical assets with precision.

Highest Australian Standards

Our wireless solutions, including the Mecon UW3 and Gasensor, comply with all relevant Australian safety regulations. Our systems meet FM 2-81 and AS 1670 standards, ensuring your facility remains protected and compliant. They are designed for ease of installation, reliable performance. Giving you confidence in continuous, effective monitoring and rapid response capabilities.

Dedicated Service & After Sales Support

Our wireless monitoring technology complies with FM 2-81 and AS 1670, meeting the highest Australian standards for fire protection monitoring systems. Designed for reliability our systems provide real time alerts and ongoing performance monitoring, giving you peace of mind and ensuring your facility remains safe, compliant and fully protected at all times.

Comprehensive Range of Solutions

We design and commission a number of world renowned solutions. They include the Mecon UW3 sprinkler supervisory switch, which enhances the safety of stationary fire protection monitoring systems; and Gasensor, a flame and gas detection system that protects lives, secures critical assets and ensures rapid response to combustible or toxic gases.
installation and maintenance

Monitoring systems built for Australia's harsh industrial environment

Delta Fire provides expert design, installation and maintenance services for fully customisable wireless monitoring systems. With this process, individual sensors are mounted in selected locations and they can transmit over wi-fi networks. The software modules provide complete reporting and incident management, increasing efficiency, saving on manpower and eliminating human error. Minimal maintenance is required with such systems.

Our wireless monitoring technology solutions are built to perform in Australia's harshest conditions. Whether installed in high risk industrial zones, remote mine sites or large commercial facilities, they provide a dependable link between critical fire protection equipment and the people responsible for maintaining it. These systems can be integrated with various suppression solutions, including sprinklers, hydrants, gaseous, foam and wet chemical systems. Offering total oversight of operational readiness.
Get in Touch

Tailored Sensor Placement for Maximum Coverage

Effortless Wi-Fi Integration, No Cabling Required

Automated Reporting That Reduces Human Error

Compliance and safety standards

Setting the standard

Our wireless monitoring solutions meet all Australian and international safety standards. The MECON UW3 valve-monitoring sprinkler-supervisory switches comply with all fire protection regulations and standards, and they are Factory Mutual (FM) approved.
Get in Touch

Trusted Foam Hardware Brands

Exceeds AS 1940 & NFPA Standards

Built for Safer Better Worksites

Why Choose Us

Australia's Premier High-Hazard Fire Protection Specialists

Tailored solutions

We assess, identify risks and deliver tailored fire suppression systems.

Peace of Mind

Technical experts and specialists in all areas of fire protection.

Nationwide Service

Providing a consistently high level of service across Australia.
How it Works

How wireless monitoring technology keeps your site one step ahead

For customers seeking around-the-clock security of valuable assets, Delta Fire will conduct a thorough risk assessment of the relevant site or facility. With digital remote fire system monitoring solutions, the design phase is quite simple. It usually entails identifying the best location of the monitors and determining the ideal option for sending signals back to a control room or a remote device.
Request a Consultation

Understand the Risk

For customers seeking around-the-clock security of valuable assets, Delta Fire will conduct a thorough risk assessment of the relevant site or facility. With digital monitoring solutions, the design phase is quite simple. It usually entails identifying the best location of the monitors and determining the ideal option for sending signals back to a control room or a remote device.

Design Phase

Delta Fire has extensive experience with the design and commissioning of wireless monitoring technology. This software is more effective than old wired systems and can be set up to match each facility's specific needs. One of the key advantages is that the technology can free up personnel who in the past had to be confined to a control room as part of the monitoring of assets.

Installation Phase

Wireless monitoring technology is easy to install, or retrofit on existing sites. The ability to continuously monitor valve positions ultimately cuts infrastructure costs and provides peace of mind. At Delta Fire, our focus is on deploying fast and effective systems that mitigate fire risks and save lives, while also minimising damage to sites and equipment. Minimal after sales maintenance is required for wireless monitoring technology, but Delta Fire is just a call away if you need assistance.
Request a Consultation
Our Case Studies

Fire Suppression Projects

Foam fire suppression solution for refurbished fuel terminal

Challenge A specialist engineering company approached Delta Fire to provide a comprehensive Foam Fire Suppression solution for a refurbished fuel terminal. The solution needed a foam dosing water driven proportioner, fire monitors and other miscellaneous fire protection equipment. Solution Upon reviewing the job brief, Delta Fire identified that the initial design was based on around […]

Learn More

August 28, 2024

Enhancing safety measures at a high hazard petrochemical site

Challenge A fire protection company engaged us to conduct foam fire suppression system testing at a high hazard petrochemical site. The objective was to ensure the systems operated correctly and met relevant standards. Delta Fire was tasked with going to their client's site and performing the necessary tests efficiently and effectively. Solution During the testing […]

Learn More

May 14, 2024

Snowy Hydro - foam fire suppression

Background  Snowy Hydro provides on demand, reliable energy to Australia with gas fired power stations. One crucial part of maintaining these types of assets is fire protection. Power generating equipment, whether a standalone unit, incorporated into a machine or equipment or adjacent to a structure, runs independently and is unattended most of the time. So, […]

Learn More

March 2, 2022
Explore All
Faqs

Frequently Asked Questions

A wireless monitoring system uses secure wireless communication to transmit real time data, alarms, and system status without the need for hard wired connections.
Wireless monitoring reduces installation time and cost, eliminates complex cabling, and allows rapid deployment in areas where wiring is impractical or cost prohibitive.
Wireless monitoring is ideal for remote sites, temporary installations, hazardous areas, legacy facilities, mobile assets and locations where downtime must be minimised.
Wireless solutions are ideal for heritage, occupied, or live environments where cabling is impractical or restric
Yes. Modern wireless systems use robust communication protocols, redundancy, and error-checking to ensure dependable performance even in harsh industrial environments.
Systems include fault monitoring and data buffering to ensure alerts are generated and communication issues are immediately identified.
Wireless monitoring can be applied to fire alarm panels, pumps, sprinkler systems, valves, tanks, gaseous systems, foam systems, and special hazard fire protection equipment.
Yes. Systems use encrypted communication, secure authentication and access controls to protect data and prevent unauthorised access.
Yes. Wireless monitoring can integrate with SCADA, BMS, cloud platforms, Fire detection systems and existing control systems for seamless data visibility.
Yes. Wireless monitoring is highly scalable. Additional sensors or devices can be added without major infrastructure changes.
Devices may be battery powered, mains powered, or solar powered, depending on application and site requirements.
Yes. Systems are designed to comply with relevant Australian Standards, radio communication requirements and site specific regulations.
Wireless monitoring offers lower installation costs, faster deployment and long term savings compared to traditional wired solutions.
Our Projects
Delta Fire delivers tailored fire suppression systems built for complex and high risk operations as well as critical sites across Australia. Each project reflects our deep industry knowledge, trusted global partnerships and commitment to long term performance and compliance.
1 2 3 … 5
Get In Touch

LET'S WORK TOGETHER

Delta Fire is committed to the continuous improvement of all aspects of the manufacture, supply and installation of fire prevention and suppression services across all industries and applications. Proudly Australian owned.
As Australia's leading provider of fire protection services and equipment, we are the experts in effective fire prevention solutions for commercial kitchens, foam suppression, gas suppression, lightning protection and vehicle protection.
cross